This product has damaged packaging and the price reflects a 15% savings from our regular selling price.
Starting at just $79.99, the Operator HO Scale SD40-2 is designed for modelers who enjoy running dimensionally accurate trains and are less concerned about factory applied detail parts. The Operator SD40-2 is based upon the Rivet Counter SD40-2 body and mechanism.
Prototype Specific ScaleTrains
- All-new model
- Fully assembled
- Three (3) different road numbers
- Directional LED headlights
- LED lighted number boards
- Dimensionally accurate truck centers
- Front anticlimber
- 88" low short hood with brakewheel
- Standard-range dynamic brake with batten strip
- See-through dynamic brake intakes with resistor grid detail
- Corrugated radiator intake grilles
- Sectioned treadplate detail on the walkways
- 3,000 gallon fuel tank
- Welded ECAFB
- "Tab-style" EFCO
- Semi-scale ScaleTrains.com Type E knuckle couplers
- Operates on Code 70, 83 and 100 rail
- Packaging safely stores model
- Color matched to Tru-Color Paint colors whenever possible
- Printing and lettering legible even under magnification
- Available with ESU Essential Sound Unit DCC and sound pre-installed
- Operates in both DC and DCC
- Pre-drilled for grab irons, coupler cut levers, MU cables, etc. - available in a separate upgrade kit (SXT80254)
- Minimum radius: 18”
- Recommended radius: 22”
In January 1972, Electro-Motive Division (EMD) of General Motors would build the first production models of a locomotive design that would prove to be legendary: the SD40-2. The flagship of the “Dash-2” series of 1972, the SD40-2 would build upon the lessons learned from its predecessor, the SD40. While the sixteen-cylinder 645E3 turbocharged prime mover remained the same from its SD40 cousin, the SD40-2 boasted a modular, solid-state electrical system, which featured removable “cards” in place of troublesome relays in its high-voltage cabinet, greatly simplifying electrical troubleshooting and repairs.
Externally, the biggest change was the use of the new HT-C three-axle truck in place of the Flexi-coil C of the SD40. The new truck promised greater adhesion, and was longer than the Flexi-coil C, necessitating an increase of the length of the SD40-2s frame to an overall length of 68’, 10” over the couplers. This also had the effect of giving the SD40-2 its characteristic long walkway “porches” at each end. Other small external improvements, such as longer battery box compartments, rear overhang on the cab roof, and drip rail over the front cab door, added to the list of external differences between it and the SD40.
Domestic production of the SD40-2 continued until July 1984 making it one of EMD’s most popular locomotives of all time. Many remain in service today, both with original owners as well as secondhand operators. Within the last five years, Norfolk Southern, CSX, and Union Pacific have rebuilt hundreds of SD40-2s to extend their operating life. This will ensure this venerable locomotive’s presence on U.S. rails for decades to come.
Our Selling Price: $79.99
ESU Essential Sound Unit DCC & Sound Factory Installed
Our Selling Price: $119.99