The Operator series HO Scale GE DASH-9 is the perfect locomotive for value conscious modelers. Each railroad shares a common cab/nose and long hood configuration to help maintain a starting price of just $99. To maximize pulling power, Operator locomotives utilize the same motor and drivetrain as their top-of-the-line Rivet Counter series counterpart. All Operator HO locomotives are available DC/DCC ready or with DCC and sound pre-installed by the factory.
Prototype Specific ScaleTrains
- Several different road numbers
- Operating front deck mounted LED ditch lights
- Printed and LED lighted number boards
- Directional LED headlights
- Tall snowplow with open doors
- 5-step stepwells with see-through steps
- GE “nub” pattern walkway tread
- Narrow profile end handrails
- Nose door with window
- GE safety cab with low headlight and sunshades
- Cab interior
- Motive Equipment Inc. (MEI) ME7000 HVAC Unit
- Finely molded grilles
- Early curved engine cab profile
- Leslie P3 Horn
- Early flanged exhaust stack housing
- Brake wheel
- Low-mounted rear sandfiller
- Early lifting lugs on ends of radiator wings
- 5,000 gallon fuel tank
- Dual fuel fills per side with rear fill “blanked”
- Separate air tanks with upper mounting brackets
- Fuel tank mounted steel bell
- Semi-scale coupler buffers
- Body-mounted semi-scale Type E knuckle couplers
- 5-pole skew wound motor with dual flywheels
- All-wheel drive and electrical pick-up
- Simplified printing and lettering legible under magnification
- Printing and lettering legible even under magnification
- Color matched to Tru-Color Paint colors whenever possible
- Operates on Code 70, 83 and 100 rail
- Packaging safely stores model
- Pre-drilled for grab irons, coupler cut levers, MU hoses, trainline hoses, etc.
- Detail kit available separately (SXT81047)
- Minimum radius: 18”
- Recommended radius: 22”
DCC & sound equipped locomotives also feature:
- ESU-LokSound Essential Sound Unit & DCC decoder
- Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more
- Operates on both DC and DCC layouts*
DCC & sound ready locomotives also feature:
- Operate using DC
- DCC-ready with 21-pin connector
* Not all sound and lighting functions on DCC and sound equipped versions are operable using DC
Our selling price: $99.99
ESU-LokSound DCC & Sound Factory Installed
Our selling price: $154.99
General Electric wrestled the title of top domestic locomotive builder from EMD during the late 1980s with their Dash-8 series. GE once again positioned themselves to shakeup the locomotive world yet again less than a decade later. Entering the 1990s, GE completely revamped their locomotive lineup by utilizing customer feedback, learning from experience gained from previous locomotive series, and improvements in technology.
A single C44-9W demonstrator unit, numbered 8601, made its debut in 1993 (and later became C&NW 8601). While similar at first glance to predecessor models like the C40-8 and C40-8W, the Dash-9 series featured a few notable physical differences. Built on a slightly longer platform that allowed for a massive 5,000 gallon fuel tank, Dash-9s also featured thicker radiator “wings” at the rear of the carbody. This is usually the quickest way to differentiate them from previous models.
Thanks to its long production span and customer options, small detail differences could be noted between various customer orders. This includes changes with HVAC system vendors (the large “A/C” box behind the cab on the conductors side), engine cab profile, radiator lifting lugs, hood end, trucks, fuel tank, stepwells, operator’s cab, and even handrail profiles.
The C44-9W proved to be extremely popular over its production span with over 3,500 locomotives being sold new to ATSF, BC Rail, BNSF, CN, C&NW, NS (including 100 spartan cab equipped versions, nicknamed “Top Hats”), QNS&L, SP, and UP.
NS was an important customer with over 1,000 Dash-9s on the roster. They preferred customized models in the form of 100 spartan-cab equipped, 4,000hp C40-9s (nicknamed “Top Hats”) and numerous examples of safety cab-equipped versions rated at 4,000hp, and designated as C40-9Ws. All C40-9/Ws would eventually be uprated to 4,400hp with their designations changed accordingly.
Over the years, the Dash-9s could be found in a variety of assignments. Santa Fe’s C44-9Ws were delivered in the famed red and silver “Superfleet” scheme and could be found hurtling across the southwest with hot piggyback trailer and container trains in tow.
Southern Pacific’s units were some of the first new six-axle power on the beleaguered railroad’s roster in more than a decade. They were pressed into a variety of assignments ranging from hot intermodal trains to coal and iron ore drags.
Chicago & North Western’s units made their debut in flashy “lightning stripe” livery and handled numerous assignments during their brief tenure before being absorbed by Union Pacific.
The Dash-9 series remained in production until the early 2000s when it was superseded by GE’s “Evolution Series” ES40/44-series models. Age has begun to catch up with the earliest C44-9W and related models so some railroads are storing and/or rebuilding these veteran units. NS’s oldest units, the spartan-cab C40-9s, are being rebuilt with the latest GE safety cab for increased crew comfort and safety plus AC-traction for increased performance.
Originally built in the early 1990s, some of BNSF’s former Santa Fe fleet are also in the process of being rebuilt with AC-traction to extend their service lives and improve their performance.
Built over a long timeframe, and proving to be a solid, upgradeable platform, the C44-9W family of locomotives including rebuilds is sure to remain a fixture on today’s railroads for the foreseeable future.