Rivet Counter N Scale GE C39-8, Pennsylvania Northeastern

Product Description

Introduced in 1984, the C39-8 maintained the clean contours of the long hood and rounded cab roof of the Dash-7 series but featured larger, angular radiator “wings” at the rear of the carbody, an angular low short hood, and a boxy dynamic brake and clean air compartment at the front of the long hood, which jutted above the cab roofline.

Even though Conrail and Norfolk Southern were the only two railroads to purchase C39-8 locomotives from GE, both railroads routinely operated C39-8s as run-through power on CSX, Union Pacific, and Southern Pacific. In fact, SP leased Conrail C39-8s in the early 1990s.

The only two C39-8 locomotives in operation today are owned by the Pennsylvania Northeastern Railroad. We would like to thank the PN for their role in developing this one-of-a-kind locomotive.


Road Number Specific ScaleTrains

Road Numbers: 8211 and 8212

  • Era: 2011 to Present
  • PN 8211
    • ex-NS 8211, ex-CR 6017
    • NS Black Paint
    • GSC trucks
      • Separately applied details include brake cylinders, air piping, and handbrake chain–
    • 5 chine horn mounted on pedestal on engine compartment
  • PN 8212
    • ex-NS 8212, ex-CR 6021
    • Conrail Blue Paint
    • GSC trucks
      • Separately applied details include brake cylinders, air piping, and handbrake chain
    • 5 Chime horn mounted on pedestal on engine compartment
  • Last operating C39-8s in the United States
  • Phase III carbody with brakewheel and late radiator exhaust grilles (4-panel)
  • Operating front ditch lights
  • Blanked marker lights
  • Small plow mounted on the front pilot
  • Large front anticlimber
  • Large and small Sinclair “Excalibur” cab roof antennas (Comm. and EOT)
  • “Bathtub” exhaust silencer


      Additional features:

      • All-new model
      • Fully assembled
      • Up to six (6) road numbers, detailed per prototype and era
      • Directional LED headlights
      • Printed LED lighted number boards
      • Phase Ib, II, and III carbodies with correct panels and grilles per variant
      • Standard (2-vent) or high-capacity (3-vent) dynamic brakes per prototype
      • Early (6-panel) or late (4-panel) radiator exhaust grilles
      • Wheel handbrakes
      • GSC truck sideframes
      • GE “nub” tread plate on walkways
      • Highly-detailed 4,400 gallon fuel tank with fuel fillers and gauges
      • Air reservoirs with separate plumbing
      • Accurately profiled frame with separately applied plumbing and cabling
      • Cab interior
      • Factory-applied wire grab irons, snowplow, spare knuckles, trainline hoses, 3-hose MU clusters, MU cables, uncoupling levers, windshield wipers, mirrors, air reservoirs, underframe bell, brake wheel, and more.
      • Body mounted ScaleTrains.com plastic semi-scale E Type knuckle coupler All-wheel drive
      • All-wheel electrical pick-up
      • Dual flywheels
      • Motor with 5-pole skew wound armature
      • Printing and lettering legible under magnification
      • Operates on Code 55, and 80 rail
      • Packaging safely stores model
      • Minimum Radius: 9 ¾”
      • Recommended Radius: 11”


      DCC & sound equipped locomotives also feature

      • ESU-LokSound Next18 Select Micro DCC and sound decoder with “Full Throttle”
      • “Sugar cube” type speaker
      • Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more
      • Operates on both DC and DCC layouts


      DCC & sound ready locomotives also feature

      • DCC ready with Next18 connector
      • Operates on DC layouts


      Historical Overview

      As the 1980s began, and with the success of their Dash-7 series, introduced in 1976, locomotive builder General Electric sought to build upon their momentum with an improved line of locomotives.  Based upon technological advances and customer feedback, GE debuted its “Dash 8” series in 1983.  Featuring improvements to the FDL series prime mover and microprocessor controls, the Dash-8 line promised improved performance, as well as improved reliability and maintainability, over their Dash-7 predecessors.  One of the first models to be unveiled was the C39-8, with a pair of testbed units built and painted for Norfolk Southern, numbered NS 8550-8551. 

      While keeping the clean contours of the long hood and rounded cab roof, two characteristics of the Dash-7 series, these new Dash-8s featured larger, angular radiator “wings” at the rear of the carbody, an angular low short hood, and a boxy dynamic brake and clean air compartment at the front of the long hood, which jutted above the cab roofline.  The NS testbed units made an imposing sight in their black paint, and were soon joined by an additional 12 units, NS 8552-8563, built in 1984.  While similar to their testbed siblings, these additional units featured slight changes to their carbodies, known as “phases” to railfans and modelers.  The testbed units would be dubbed “Phase Ia”, while NS 8552-8563, with slight production changes to their radiator grills and dynamic brake compartment would be known as “Phase Ib” units. 

      Pleased with their performance, an additional 50 units were delivered in 1985, NS 8564-8613.  “Phase II” units, they differed from the previous orders by featuring high-capacity dynamic brakes that resulted in an additional dynamic brake intake and exhaust opening (for a total of three), a handbrake wheel instead of ratchet handbrake, and a larger 4,400 gallon fuel tank replacing the 3,900 gallon tank of previous orders.  Also eliminated were the vertical grab iron “ladder strips” on the end of the long hood.  Rounding out the NS fleet would be an additional 50 units, built in two batches of 25 units each, NS 8614-8638 and NS 8639-8663, delivered in 1986.  These so-called “Phase III” units would feature even more subtle changes; the radiator grills at the end of the long hood featured a slightly different configuration and a flush mounting, the cab doors changed to a square-cornered design, and the units featured a tall 42” snowplow at both ends, in contrast with the smaller 35” plow of previous deliveries.

      Just when it seemed like NS would be the sole operator of the C39-8, eastern carrier Conrail ordered 22 units, delivered as CR 6000-6021, in 1986.  Phase III units that shared some common features as their NS contemporaries, they did have some physical differences unique to Conrail; single-color red marker lights were installed instead of the tri-color class lights found on the NS units, and a massive anticlimber assembly was installed on the front pilot.  Delivered in Conrail’s attractive blue and black scheme, they featured the then-standard large Conrail “Wheels on Rail” logo on the long hood. 

      On the NS, the C39-8s could often be found hauling one of NS’s key commodities at the time: coal.  Setup with bidirectional control stands, it wasn’t uncommon to see a C39-8, or several, working long-hood first on a lengthy coal drag on NS territory.  Conrail’s small fleet was commonly seen working on a variety of assignments, from mixed freight to intermodal.  Both CR’s and NS’s C39-8s could be routinely seen operating as run-through power on connecting railroads, such as CSX, Union Pacific, and Southern Pacific.  CR and NS C39-8s have been photographed far away from home; they’ve been seen as far west as Long Beach, California, operating on the Southern Pacific.  In fact, a power-hungry SP leased Conrail C39-8s in the early 1990s, with the leased units featuring a small red “L” painted on their cab sides, signifying their leased status, and adding a splash of color to SP motive power consists over the system.

      As the years and miles added up, the C39-8s of both CR and NS would undergo small physical changes.  To aid crews climbing aboard, small vertical grabs would be added to the nose fronts of the NS units, while Conrail opted to add large “inverted-L” grabs to the noses of theirs for the same purpose.  Repaints in later years would introduce new paint scheme variations; some NS units would receive dashed white sill stripes, while some CR units would receive solid white frame stripes.  Several CR units were noted to receive the “Conrail Quality” paint scheme, as well.  Their as-built class lights eventually disappeared from the NS fleet, and by the mid-1990s, FRA-mandated ditch lights began to appear on both the CR and NS fleets.  

      The year 1998 brought more change, as Norfolk Southern and CSX acquired Conrail. The eastern giant was split between the two carriers, including locomotives and rolling stock.  NS received 13 former CR C39-8s, while the remaining 9 CR C39-8s went to CSX.  While most kept their blue paint, gaining a “patch” renumber into the CSX fleet, four of them received CSX paint - two painted in YN2, and two receiving YN3.  Norfolk Southern repainted several of their former Conrail C39-8s as well, exchanging their coats of Conrail Blue for NS black.

      By the early 2000s, with many miles racked up by the C39-8s, and newer, more reliable and fuel-efficient locomotives coming online, the trailblazing GEs began to be set aside in deadlines, with many meeting the scrapper’s torch.  Some were spared that fate, being exported to Central America, home to railroads with a healthy appetite for used US locomotives.  A handful found new homes on US shortlines and lease operators, but their use was to be short-lived.  As of this writing, the only examples in operation in the US are a pair of former Conrail (by way of NS) units in use by eastern shortline Pennsylvania Northeastern Railroad.  While no longer hustling along the high iron with long coal or hotshot intermodal trains in tow, the PNRR’s pair of units operates regularly, and represents the last of GE’s pioneering early Dash-8s.

      DCC & Sound Ready
      Retail: $169.99
      Our Selling Price: $134.99

      ESU-LokSound DCC & Sound Equipped
      Retail: $279.99
      Our Selling Price: $224.99

      SKU Road Number & Sound Options Price Quantity
      SXT31154 8211 / ESU LokSound DCC & Sound Equipped $224.99 Sold Out
      SXT31155 8211 / DCC & Sound Ready $134.99 Sold Out
      SXT31156 8212 / ESU LokSound DCC & Sound Equipped $224.99 Sold Out
      SXT31157 8212 / DCC & Sound Ready $134.99 Sold Out

      Related Products